Thermal solution for incubator

Brief introduction of incubator:

Incubator, also known as blast drying oven, is a necessary test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. It is used to test and determine the parameters and performance of electrical, electronic and other products and materials after high temperature test temperature environment changes. , whether it can still meet the predetermined requirements for product design, identification and factory inspection.

The incubator is generally composed of a box, a heating element (nickel-chromium heating wire), a thermometer or thermometer, a temperature control mechanism, a signal system, etc., and the special-purpose incubator also includes a water tank, a blower motor, and an explosion-proof device. The intake holes are generally at the bottom of the box, and the exhaust holes are at the top. The outer shell is an iron or wooden box, and the inner is an incubator. The heating wire is installed on the bottom layer, single or multiple in parallel, divided into main heating wire and auxiliary heating wire, and some are also equipped with heating wire on the side wall. The outside of the box is coated with baking varnish, and the inner wall of the box is coated with high temperature resistant silver powder for corrosion resistance. Therefore, choosing a suitable glue solution has also become an indispensable link in the production process of the incubator.

Glue requirements for incubators:

1. High bonding strength to the chassis frame;
2. Excellent heat dissipation for heating components;
3. Environmental protection, non-toxic, with routine testing certification and qualifications;
4. Moisture-proof, anti-static, dust-proof, mildew-proof, salt-fog resistance, etc. for circuit boards.

Glue scheme for incubator:

According to the material, shape, gluing environment and process of the incubator product, the specific glue requirements are also different. For more glue solutions, please contact Cohetion.